Strand prestressing strand to wear wear-beam machine price strand of the beam machine strand space shuttle space shuttle manufacturers 
 Shandong's most high-quality strand shuttle strength of manufacturers to strand the shuttle is simply a big profit. Saves time and effort. Everyone says that. Wear strand cable machine is a newly developed threading machine saves time and effort, and Practice has proved that the section of the machine can be worn every day 30 tons of steel strand, equivalent to 10-15 workers, the actual operation, the longest transmission The distance can be worn to 150-200 meters, and how amazing the number of action quickly. 
 Immediately pick up the phone to order it: 15,169,703,334. 
 Strand to wear the cable machine strand shuttle strand shuttle price strand shuttle manufacturers 
 Strand to wear the beam / strand shuttle use: 
 Strand wear-beam machine (PC strand to penetrate the Road hole referred to as wear cord), and by mechanical transmission, wheel clamping strand transmission may enter, retreat, and can be continuously transmitted, can also be to move the transfer convey the strand speed with stepless speed control, easy operation, reliable performance, efficiency significantly, the aircraft greatly reduce the labor intensity, mining equipment, Ding Cheng, Jining City, the production of wear-beam machine is widely used in large bridges, box girder and structures. Is the ideal wear cable construction machinery, prestressing work wear steel hinge line for the channel, the main tool used in the construction of bridges and large buildings. 
 Strand to wear the beam / strand shuttle works: 
 Reducer drive double driving wheel rotating steel hinge line is inserted from one end of the line port, driving wheel pairs Cong wheel press and hold the steel hinge line to move forward along the catheter penetration of reserved channels, wear clothing to achieve the tension until the other end from the pore with size. 
 Strand to wear the beam / strand shuttle technical parameters: 
 Product Name strand to wear the beam machine 
 Model DCXC-4 (4KW) 
 Transportation distance of 40-140M (based on motor size, can deliver different distances) 
 Motor power 4KW/5.5KW 
 The whole size of 640mm * 440mm * 240mm 
 Total Weight 120KG 
 Main features: 
 Beam machine of this strand to wear to retreat into, be fast or slow, small size, light weight, simple operation, easy maintenance, they can be done in the construction process, greatly reducing the labor intensity, improve production efficiency. 
 Strand to wear the beam machine use: 
 1, the preparatory work before starting 
 (1) Check the electrical wiring is intact, check the deceleration within the oil surface location. 
 (2) Check the motor to move the forward direction, whether to comply with the direction of the arrow mark on the chassis. 
 (3) power, debugging determine reversing. 
 2, normal work 
 (1) will lay the shelf steel hinge line inserted from the mouth of the inlet line of the machine to move the line button switch, Steel Cable slow penetration machine along the catheter into the reserved channel to the other end of the piercing to set aside Zhang pull size, cut with a hand-held sand turbines. 
 (2) to reach the transport distance, Cong wheel compression spring screw to adjust the machine until the job requirements, but can not be adjusted too tight, so as not to exacerbate the wear of the pressure roller operation and reduce service life. 
 (3) hours of work, attention is functioning properly, when the discovery of any failure, should be immediately shut down, identify the reasons for troubleshooting and then start. 
 Contact: Cao Jie 
 Phone: 15169703334 
 Plane :0537-3200131 
 E-mail: 2206280991@qq.com